Learn To Discover

Facebook Instagram Linkedin Youtube X-twitter

DHA Suffa University

DIRECTORATE OF POST GRADUATE PROGRAMS

Introduction:

The Directorate of Post Graduate Program (PGP) has been established in the recent past at DHA SUFFA UNIVERSITY with the concerted focus of worthy Vice Chancellor Brig Prof. Dr. Ahmed Saeed Minhas for quality research outcome in postgraduate programs of the university. The primary goal of the Directorate is to integrate resources and means for the said quality and oversee postgraduate programs at the university. The Directorate has been designed to amicably deal with all aspects related to postgraduate matters in-line with HEC policy guidelines, ensuring compliance with the postgraduate Rules and Regulations of the university as well. PGP Directorate is to create optimally supporting environment for conducting high-quality research and providing training to MS/MPhil/Ph.D. scholars and their supervisors to make society centric and intellectually rich scholarly contributions.

NEWS

Director Postgraduate Programs

Engr. Prof. Dr. Ahmad Hussain

Professor and Dean (EAS)

Ph.D (Thermo-fluids), University Technology Malaysia,

Email: ahmad.hussain@dsu.edu.pk

Deputy Director Postgraduate Programs

Ms. Rabia Mumtaz

Senior Lecturer

MS (Management Sciences)
Email: rabia.mumtaz@dsu.edu.pk

GRADUATE PROGRAM CO-ORDINATORS

Department of Computer Science

 

Engr. Dr. Shahzad Ashraf

Associate Professor

(Ph.D. Information and Communication Engineering), Hohai University Changzhou, China

Email: shahzad.ashraf@dsu.edu.pk

Department of Humanities and Social Sciences

Dr. Razi Sultan Siddiqui

Assistant Professor

PhD (Psychology), UoK

Email: razi@dsu.edu.pk

Department of Electrical Engineering

Engr. Dr. Sunil Kumar

Assistant Professor

PhD (Electrical Engr.), Hanyang University, South Korea

Email: sunil.kumar@dsu.edu.pk

Department of Mechanical Engineering

Engr. Dr. Muhammad Usama Siddiqui

Associate Professor

PhD (Mechanical Engineering), KFUPM, Saudi Arabia

Email: musiddiqui@dsu.edu.pk

Department of Management Sciences

Dr. Muhammad Sajjad Ashraf

Assistant Professor

PhD (Management Sciences)

Email: muhammad.sajjad@dsu.edu.pk

Date: 16 April 2025
Time: 3:00 PM
Venue: Executive Lecture Theater (ELT)

Name Reg No Program
Hammad ur Rehman MBA231009 MBA
Hammad Saleem MBA231007 MBA
Sundus Anjum MS212507 MS

Date: 17th & 18th April 2025
Venue: Executive Lecture Theater (ELT)

NameReg NoSupervisorDateTime
Azam AnwarMS211606Dr. Usman Ahmed17 April 202510:00 AM
Asad AliMS201603Dr. Usman Ahmed17 April 202511:00 AM
Subeika RizviMS211607Prof. Dr. Bashir Ahmed18 April 202510:30 AM
Facebook Instagram Linkedin Youtube X-twitter

About Us

About Us
  • DSU MAIN CAMPUS
  • DHA CITY KARACHI (DCK) CAMPUS

FACILITIES & SERVICES

CONNECT DSU

Locations

  • DSU MAIN CAMPUS
  • DHA CITY KARACHI (DCK) CAMPUS
Apply for Admission
Scroll to Top

Engr. Prof. Dr. Ahmad Hussain

Professor & Dean (EAS)

 

Academic Background:

  • HEC Approved Ph.D Supervisor
  • Ph.D (Thermo-fluids), University Technology Malaysia, Johor, Malaysia, 2006
  • M.Sc (Nuclear Engineering), Centre for Nuclear Studies, Pakistan Institute of Engineering & Applied Sciences, Islamabad, Pakistan, 1991
  • B. E. (Mechanical), NED University of Engineering & Technology, Karachi., Pakistan, 1988

Biography

Dr. Hussain has bachelors in Mechanical Engineering from NED University of Engineering & Technology, Karachi in 1989. After completing the Masters in Nuclear Engineering from Quaid-e-Azam University, Islamabad, Pakistan, he joined Karachi Institute of Power Engineering in 1991 which is an affiliated with PIEAS, Islamabad. Dr. Hussain was associated with this institute as a faculty member and researcher until 2010. In 2002, he was awarded Commonwealth Scholarship for Ph.D in Mechanical Engineering. During my Ph.D, he had designed and fabricated my combustion test rig and did a number of experiments on that rig for low grade coal combustion and gasification. During his stay in Malaysia, he was involved in a number of research projects for state owned giants like SIRIM Berhad and Tenaga Nasional Berhad. Dr Hussain moved to Saudi Arabia in December 2010 and have worked for King Abdul University at Jeddah Campus for about five years during which he acquired research funding for various research projects whose details will follow later in his resume. Dr. Hussain has recently got a US patent accepted a patent number has been issued. After his return to Pakistan in 2016, he joined as Tenure Track Professor at NED University, Karachi. Dr. Hussain has more than 2 years of post Ph.D experience and a total teaching experience of 27 years.

During his stay at King Abdulaziz University, Jeddah, KSA, he worked as Advisor Research for two years. During this period he organized the research publications work at KAU which helped the University to climb up in QS Rankings. A number of grants were also secured during this period. Later on I was actively involved in the ABET accreditation process. Worked as Director, ORIC at SZABIST, Karachi. A number of startups were initiated our which were supported by private companies. Also handling a grant of about 81 Million Pak Rupees on Predictive Analytics Lab. SZABIST has won a TDF grant of 14 M to make documentaries Highlighting H.E.C/T.D.F Success Stories. This is the video documentary project. Currently working as Professor, Department of Mechanical Engineering, Suffa University, Karachi

WORK EXPERIENCE ( Total Teaching/Administrative and Research Experience of 27 Years)

  • DHA Suffa University, Karachi (August 2020 – to date) working as Professor
  • SZABIST, Karachi (Mar. 2018 — July 2020) Working as Director, ORIC
  • Hamdard University, Karachi (Nov 2017 – Feb 2018) – Professor
  • NED University of Engineering & Technology, Karachi. (June 2016 – Oct 2017- 1.5 years) – TTS Professor
  • King Abdulaziz University (QS Ranked 50 in Asia), Jeddah, Saudi Arabia (2011-2015 – 5 years) Research Advisor/ Professor
  • Karachi Institute of Power Engineering (KINPOE, PIEAS) (From 1991-2010- 19 years) – Head Mechanical
  • Faculty Member University Technology Malaysia, Johor Bharu Malaysia (2006-2007) – Research Associate

PROFESSIONAL AFFILIATIONS

  • Member of the Accreditation Committee of the Pakistan Engineering Council to visit various engineering universities for zero visits or follow up visits and OBE accreditation visits.
  • Member of the Expert Committee of HEC for Scientific and Engineering Journals – attended various meetings in Islamabad
  • Registered as Professional Engineer with Pakistan Engineering Council, Islamabad, Pakistan (Life Member)
  • Member, American Society of Mechanical Engineers (ASME)
  • Member, Society of Petroleum Engineers (SPE), USA
  • Member IASTED, Canada

27 YEARS OF PROFESSIONAL & ADMINSTRATIVE  EXPERIENCE

Worked for about 20 years at Karachi Nuclear Power Complex which is first installed nuclear power plant of Pakistan. I was involved in addressing design related issues of the plant in addition to teaching professional courses related to Plant. Before coming to Saudi Arabia, I was working as Head, Mechanical at KINPOE/PIEAS.

27 YEARS OF PROFESSIONAL & ADMINSTRATIVE  EXPERIENCE

1. Ph.D. Research Project on Circulating Fluidized Bed Coal Combutor

The purpose of this study is to investigate the hydrodynamic behavior and thermo chemical performance of biomass and coal blends in a Circulating Fluidized Bed (CFB), which is an upcoming technology in Malaysia. Thermochemical studies for palm shell wastes and coal blends were done in a hot circulating fluidized-bed (CFB) test rig, installed at SIRIM Berhad, Shah Alam,

2. Consultation Work For SIRIM Berhad, Malaysia On Municipal Waste Combustion

A consultation work was done for SIRIM Berhad, Shah Alam on the project titled “Computer modelling of a municipal solid waste combustor for different fuel mixtures” from May-July 2004. Numerical simulations of the flow field inside the primary and secondary combustion chambers provided the temperature profiles and the concentration data at the nodal points of computational grids. Parametric study was also done to minimize the NOx emissions.

3. Consultation work for Tenaga Nasional Berhad, Malaysia on Combustion Simulation for Palm Olein Blended Fuel

Work related to experimental and combustion simulation was done for TNB from September 2004 – April 2005 on a project titled “Experimental and simulations studies of combustion test firing of blended palm olein-distillate oil in laboratory combustion test rig”.  As far as the temperature distribution, flame structure and NOx emissions are concerned; it is not useful that the palm olein blending should be used in excess of 40%. For high blended fuel, the excessive soot particles may cause damage to turbine blades.

 4. Consultation Work for SIRIM Berhad, Malaysia on Combustion Studies of Oil Palm Shell Waste

A joint research project is being initiated in June 2005 between Faculty of Mechanical Engineering, UTM and SIRIM Berhad, Shah Alam to investigate efficient combustion method for solid wastes in Malaysia. Circulating fluidized-bed technology is considered to be one of the most suitable techniques to thermally convert different fuels into useful energy. The purpose of the tests is to investigate the suitability of the selected fuels for energy production using CFBC while taking care of the flue gas emissions.

5. Quality Assurance Criteria For Managers In Energy Sector

This research was done to develop energy conservation culture in our society and also prepare manpower for designated posts such as energy officers, energy auditors and energy managers. The importance of energy management and conservation will help to withstand nation in upcoming competitive industrialized global environment. Certification methodology for energy officers, energy auditors and energy managers is designed particularly for Pakistani working environment along with the accreditation of institutes in private sector which will provide training and carry out official energy audits.

6. Nuclear Desalination

There is a grown interest in the area of nuclear desalination i.e., the production of freshwater via seawater desalination using nuclear energy using nuclear generating units. A number of countries are currently engaged in this activity. A nuclear desalination demonstration facility (4,500 m3/d MED coupled to a PHWR) in Karachi, Pakistan is currently working under testing phase. Techno-economic feasibilities are being done to make nuclear desalination a viable option is being done now which is important for coastal countries, which are suffering or will soon suffer serious water shortages.

RESEARCH GRANTS

 The following funded projects were done during my stay at King Abdul Aziz University.

1- Energy Management Studies of Faculty of Engineering at King Abdul Aziz University, Rabigh, Saudi Arabia (SR 50,000 KAU Funded Project, Already Completed)

2-Pyrolysis and devolatization behavior of Palm dates wastes (KAU Funding available – SR 50,000, Completed)

3-Pyrolysis process development and surface chemical treatment of palm wastes based activated carbon to improve its adsorption capacity in industrial wastewater treatment process (KACST Funded Project – 2 Million SR)

4-Hydrodynamic and fluidization behavior in a Circulating Fluidized Bed Riser (KAU Funding Available – SR 50,000, Completed)

United States PATENT:

Iqbal Ahmed, Ahmad Hussain, Hani Hussain Sait (2017) HIGH PERFORMANCE MINI-PUMP FOR LIQUIDS, United States Patent Application Publication, Pub. No.: US 2017/0184122 A1; Pub. January, 2019

SELECTED IMPACT FACTOR JOURNALS PUBLICATIONS

1. Asifa Bashir, Farzana Hanif, Ghazala Yasmeen, Fazal Mabood, Ahmad Hussain, Naseem Abbas, Ammar Bin Yousaf, Muhammad Aamir, Suryyia Manzoor (2019) Polyaniline based magnesium nanoferrite composites as efficient photocatalysts for the photodegradation of Indigo Carmine in aqueous solutions, Desalination and Water Treatment, doi:10.5004/dwt.2019.24394, Accepted Article 7-6-2019,
Impact Factor = 1.383

2. Ahmad Hussain, Iqbal Ahmad, Mahrukh Zaidi (2019) The Importance of Seawater Intake and Its Treatment Techniques for RO Desalination Plant, Pakistan Journal of Scientific and Industrial Research, PCSIR, Scientific Information Centre. Accepted Article in Press. (HEC – Y Category Journal) Accepted 5-3-2019

3. Ahmad Hussain, Faraz Junejo, Muhammad Nauman Qureshi, Afzal HAque (2019) Hydrodynamic and combustion behavior of low-grade coals in the riser of a circulating fluidized bed combustor, NUST Journal of Engineering Sciences, Accepted Article in Press. (HEC – X Category Journal) Accepted 10-3-2019

4. Lubna Khlaid, Ahmad Hussain (2019) From Theory to Practice: Classroom Application of Outcome-Based Education in SZABIST Schools at Larkana, Pakistan, 3rd International Social Sciences and Humanities Berlin Conference, Berlin, 02-05 May, 2019

5. Ahmad Hussain, Syed Murtuza Mehdi, Amjad Ali, Muhammad Adeel, Mohammed Hassan Jabal, Farid Nasir Ani (2018)Investigation of tribological characteristics of castor oil with mineral oil blends, First online 23 October(2018), Journal of Engineering and Applied Sciences (JEAS), Vol 37 No 1 ( HEC Recognized X – Category Journal)

6. Farhad Ali, Ahmad Hussain, Yasmin Nergis,, Mughal Sharif, Sadaf Faryal Shah, Absar Ahmed Khan (2018) Impact of Eutrophication on Shallow Marine Water near Karachi , Coast, Pakistan, Proceedings of the Pakistan Academy of Sciences: Pakistan Academy of Sciences B. Life and Environmental Sciences 55 (2): 27–36 (HEC – Y Category Journal)

7. Shamoon Jamshed, Shafiq Rehman Qureshi, Aqueel Shah, Ahmad Hussain (2018) Investigation of Entropy Generation Rate and its Minimization in Helical Grooved Tubes, Journal of Mechanical Science and Technology (Springer), Accepted Article. Impact Factor = 1.194

8. Maaz Akhtar, Sayyad Zahid Qamar, Syed Murtuza Mehdi, Ahmad Hussain (2018) Diffusion-based swelling in elastomers under low- and high-salinity brine, Journal of Elastomers & Plastics, 51 (1): 75-84, First Online 9 September 2018 (IF = 0.783)
https://doi.org/10.1177/0095244318796622

9. Ahmad Hussain, Murtuza Mehdi, Maaz Akhtar, Farid Nasir Ani, Iqbal Ahmed (2018) Combustion Performance of Diesel Palm Olein Fuel: A Combined CFD and Experimental Approach, Arabian Journal for Science and Engineering, Volume 43, Issue 3: pp 1291–1300 https://doi.org/10.1007/s13369-017-2823-5 Impact Factor = 0.86

10. Ahmad Hussain, Syed Murtuza Mehdi, Amjad Ali, Muhammad Adeel, Mohammed Hassan Jabal, Farid Nasir Ani (2018) Investigation of tribological characteristics of castor oil with mineral oil blends, Journal of Engineering and Applied Sciences (JEAS), Vol 37 No. 1 .(HEC Recognized X – Category Journal) https://journals.uetjournals.com/index.php/JEAS/article/view/2688

11. Farhad Ali, Ahmad Hussain, Yasmin Nergis, Mughal Sharif, Sadaf Faryal Shah (2018) Impact of Eutrophication on Shallow Marine Water near Karachi Coast, Pakistan, Proceedings of the Pakistan Academy of Sciences, 55 (2): 27–36 ( HEC Recognized X – Category Journal) http://www.paspk.org/proceedings/

12. Murtuza Mehdi, Maaz Akhtar, Ahmad Hussain, Muhammad Nauman, Dheya Shuja Alothmany, Iqbal Ahmed and Kyung-Hyun Choi (2017) Dip coated stretchable and bendable PEDOTPSS films on low modulus micro-bumpy PDMS substrate, Journal of Polymer Engineering, Published ahead of printing, https://doi.org/10.1515/polyeng-2017-0081
Impact Factor = 0.66

13. Ahmad Hussain, Murtuza Mehdi, Maaz Akhtar, Farid Nasir Ani, Iqbal Ahmed (2017) Combustion Performance of Diesel Palm Olein Fuel: A Combined CFD and Experimental Approach, Arabian Journal for Science and Engineering, Accepted Article in Press.
Impact Factor = 0.86

14. Yasmin Nergis, Mughal Sharif, Ahmad Hussain, Jawad A Butt1 and Yusra Tahir (2017) Reed Bed Technology and Recharging on Groundwater: Mitigating the Climate Effect of Coastal Areas, Journal of Earth Science & Climatic Change 8:7, DOI: 10.4172/2157-7617.1000406 Impact Factor = 1.06

15. Ahmad Hussain, Shahid Ali, Iqbal Ahmed, Jolius Gimbun, Muhammad H. Albeirutty and Zulfiqar Ahmad Rehan (2016) Microwave Reinforced Transesterification of Rubber Seed Oil Using Waste Cement Clinker Catalyst, Current Nanoscience Volume 12 (E-pub ahead of print). Impact Factor = 1.096

16. Syed Murtuza Mehdi,Maaz Akhtar, Ahmad Hussain (2016) CFD Study of Liquid Sodium inside a Wavy Tube for Laminar Convectors: Effect of Reynolds Number, Wave Pitch and Wave Amplitude, Mathematical Problems in Engineering , Volume 2016, Article ID 6146195, 7 pages http://dx.doi.org/10.1155/2016/6146195
Impact Factor = 1.381

17. Syed Murtuza Mehd, Maaz Akhtar, Ahmad Hussain (2016) Electromechanical Response of Dip-coated Silver Films on Micro Bumpy Polymer Surface, Arabian Journal for Science and Engineering, doi:10.1007/s13369-016-2358-
Impact Factor = 0.4

18. Zainal Abidin Yusof, Iqbal Ahmed, Ahmad Hussain (2015) Thermal Evaluation of Diesel/Hydrogen Peroxide Fuel Blend, Chemical Engineering Technology 38, No. 12, 2170–2180. Impact Factor = 2.44

19. Ahmad Hussain, Fouad Abulaban, Syed Khubaib, Sajjad Mubin (2015) Steady state and transient thermalhydraulic analysis of PHWR using COBRA-3C/RERTR, Iranian Journal of Science and Technology – Transaction of Mechanical Engineering, Vol. 39, No.M1, pp 233-242 Impact Factor = 0.53

20. Abdelkarim M. Hegab, Hani Hussain Sait Ahmad Hussain (2015) Impact of the Surface Morphology on the Combustion of Simulated Solid Rocket Motor, Mathematical Problems in Engineering Hindawi Publishing Corporation, Volume 2015, Article ID 485302, http://dx.doi.org/10.1155/2015/485302
Impact Factor = 1.381

21. Dheya Shujaa Al-Othmany, Ahmad Hussain, Essam Banoqitah (2015)High-Level Radioactive Waste Storage Feasibility for the Kingdom of Saudi Arabia Arabian Journal for Science and Engineering, ISSN 1319-8025 Volume 40 Number 1:195-203, DOI 10.1007/s13369-014-1503-y Impact Factor = 0.4

22. Syed Waheed ul Hasan, Ahmad Hussain (2014) Date Palm Waste Gasification in Downdraft Gasifier and Simulation using ASPEN HYSYS Energy Conversion & Management 88:693-699 Impact Factor = 3.59

23. Mustafa Zaidi, Imran Amin, Ahmad Hussain, Nukman Yusoff (2014) Error assessment of laser cutting predictions by semi-supervised learning, Journal of Central South University (Springer) 221: 3736−3745 DOI: 10.1007/s11771-014-2357-x Impact Factor = 0.464

24. Fathi Djouider, Ahmad Hussain (2014) A laboratory study of the oxidation of non toxic Cr(III) to toxic Cr(VI) by OH. free radicals in simulated atmospheric water droplets conditions: Potential environmental impact Journal of Hazardous Materials (Elsevier) 276: 19-25 Impact Factor = 4.14

25. Abdullah Alshehri, Ahmad Hussain, Yousof Almubarak (2014) Energy Conversion Measures in the Industries of Saudi Arabia and Development of Methodology for Certification of Energy Personnel in the Kingdom, Energy Policy (Elsevier) 64: 203-208 Impact Factor = 3.382

26. Abdulkarim Hegab, Hani Hussain Sait, Ahmad Hussain, A.S. Said (2014) Numerical Modeling for the Combustion of Simulated Solid Rocket Motor Propellant, Computers and Fluids (Elsevier) 89: 29-37. Impact Factor = 1.830

27. Siti Nur Sakinah Jamaludin, S. Basri, Ahmad Hussain, Dheya Al-Othmany, F. Mustapha and Dewan Muhammad Nuruzzaman (2014) Three Dimensional Finite Element Modeling of Thermomechanical Problems in Functionally Graded Hydroxyapatite/Titanium Plate, Mathematical Problems in Engineering. Impact Factor = 1.380

28. Ahmad Hussain, Fouad Abolaban (2014) Nuclear Desalination: A Viable Option for Producing Fresh Water- Feasibility and Techno-Economic Studies, Life Science Journal 11(1): 301-307 Impact Factor = 0.167

29. Muhammad Yusuf, Abdelhamid Saoudi, Nazeeh Alothmany, Dheya Alothmany, Sameer Natto, Nurul Islam Molla, Noor Mail, Abdulraheem Abdulrahman Kinsara, Ahmad Hussain(2014) Characterization of the Optically Stimulated Luminescence nanoDot for CT Dosimetry, Life Science Journal 11. Impact Factor = 0.167

30. Ahmad Hussain, Iqbal Ahmed,Hani Hussain Sait, Mohamed Ismail Basayoni, Hegab, Abdelkarim Morsy Hegab, Syed Waheed, Farid Nasir Ani (2013) An Experimental and Simulation Study of Fluidization Behavior of Palm Biomass in a Circulating Fluidized Bed Riser, Industrial & Engineering Chemistry Research 52: 17529−17537 DOI: 10.1021/ie401856b Impact Factor = 2.206

31. F. A. Abolaban, M. A. Najem, Ahmad Hussain, Majdi Alnowaimi, David Bradley (2013) Improving MVCBCT image quality using a Cu target with flattening filter-free LINAC, Life Sci J 2013;10(4):1624-1628]. (ISSN:1097-8135). ImpactFactor= 0.167

32. Mustafa Zaidi, Imran Amin, Ahmad Hussain, Nukman Yusoff (2013) Estimation of ANN Modelling of Laser Cutting with Missing Values, La Pensee 75 (10): 159-171.
Impact Factor = 0.06
33. Iqbal Ahmed, Ani Idris, Ahmad Hussain, Zainal A.M. Yusof, Muhammad Saad Khan (2013) Influence of Co-solvent Concentration on the Properties of Dope Solution and Performance of Polyethersulfone Membranes, Chemical Engineering & Technology (Wiley –VCH Verlag GmbH), 36 (10): 1-9 Impact Factor = 1.366

34. Skakaib, M., Iqbal, A., Rosli M. Yunus, Ani Idris, Hussain, A. (2013) Influence of Monosodium Glutamate Additive on Morphology and Permeability Characteristics of Polyamide Dialysis Membrane, Journal of Applied Polymer Science, Vol. 128, Issue 5: 3346-3355 DOI: 10.1002/APP.38377 Impact Factor = 1.395

35. Hani H. Sait, Ahmad Hussain, Arshad Adam Salema, Farid Nasir Ani (2012) Pyrolysis and combustion kinetics of date palm biomass using thermogravimetric analysis, Journal of Bioresource Technology (Elsevier), 118: 382-389 Impact Factor = 4.75

36. Abdelkarim Morsy Hegab, Hani HussainSait, Ahmad Hussain, Ashraf Balabel, Mahdi Almutawa, Fathi Djouider. Modeling Of Microscale Solid Rocket Composite Propellant. Life Sci J 2013; 10(4): 523-531]. (ISSN:1097-8135). http://www.lifescienceite.com.
Impact Factor = 0.167
37. Mahdi AlMutawa, Ahmad Hussain, Abdekarim Morsy Hegab, Faheem Hassan Akhtar. Feasibility Studies of Solar Assisted Desalination Technology for the Coastal Areas of Rabigh Using Multi Effect Desalination Method and Its Lab-Scale Demonstration. Life Sci J 2013;10(3):2691-2697]. (ISSN: 1097-8135).http://www.lifesciencesite.com. Impact Factor = 0.167

38. Dheya O,Ashraf S, Ahmad H. Gamma Rays Transmission Densitometry of Distillation Columns and Development of a Computerized Expert System for Faulty Analysis, Life Sci J 2013;10(2):1613-1618]. (ISSN:1097-8135). http://www.lifesciencesite.com. 228 Impact Factor = 0.167

39. Iqbal, A., Hussain,A., I, Hasani, S.M.F., Shakaib, M., Yunus, R.M. (2012) Computational modeling for visualization of flow patterns in a membrane testing device, Journal of Separation and Purification Technology 90: 1-9 Impact Factor = 3.52

40. Iqbal Ahmed, Ahmad Hussain, Hani Hussain Sait (2017) High Performance Mini-Pump for Liquids, United States Patent Application Publication # US 2017/0184122 A1, Published 29 June 2017.

NON Impact Factor

41. Fareda Zeab , Uzma Ali , Ahmad Hussain (2016) A comparative study on mental health of working and non-working women in Pakistan: Stress, Journal of Research on Humanities and Social Sciences, Vol. 6 No. 5:8-14 Indexed in SCOPUS
42. Yasmin Nergis, Mughal Sahrif, Abdul Hameed Memon, Dheya AlOthmany, Khawar Naveed, Ahmad Hussain (2016) Ecosystem Approach And Hydrological Potential Study Of Port Qasim Industrial Coastal Zone Of Karachi Pakistan, Journal of Civil and Environmental Research, ISSN (Paper)2224-5790, ISSN (Online)2225-0514, Vol. 8 No. 2: 18-26 Indexed in SCOPUS

43. Yasmin Nergis, Mughal Sahrif, Ahmad Hussain, Khawar Naveed, Abdul Hameed Memon (2015) Ecosystem Approach and Hydrological Potential Study of Coastal area of Thatta Sindh, Pakistan, International Journal of Environmental Geology Vol:6(2): 52-55 HEC Recognized Journal (Y-category)

44. Amber Nasreen Anjum, Dheya Shujaa Al-Othmany, Ahmad Hussain (2015) Generalization of Motivational Factors in L2 Learners, Journal: International journal of Education & Practice Vol 6, No (30 ): 170-177 Indexed in SCOPUS

45. Ahmad Hussain, Naz Islam, Abdulraheem Abduklrahman Kinsara, Fouad Abolaban (2014) Need for a Safety Culture in the Nuclear Facilities of Saudi Arabia, Middle-East Journal of Scientific Research, Volume22 Issue12, Pages 1771-1781 Indexed in SCOPUS

46. Yasmin Nergis, Mughal Sharif, Afzal Farooq Choudhry, Ahmed Hussain, Jawad Abdullah Butt (2012) Impact of Industrial and Sewage Effluents on Karachi Coastal Water and Sediment Quality, Middle-East Journal of Scientific Research 11 (10): 1443-1454, ISSN 1990-9233 Indexed in SCOPUS

47. Sait, H., Hussain, A., Selim, A. (2012) Experimental investigation on freezing of water falling film on vertical bank of cold horizontal tubes, Journal of Thermal Science and Engineering Applications – ASME Transaction, Vol. 4: 1-4 (Indexed in SCOPUS) Cited = 1

48. Hussain, A., Ani, F.N. and Darus, A. N. (2008). Gas-solid flow modelling in the riser of a circulating fluidised bed. International Journal of Modelling and Simulation, 28(1), IASTED, Acta Press. Calgary, CANADA Vol. 28 (1): 85- 90 Cited =3 Indexed in SCOPUS

49. Hussain, A., Ani, F.N., Sulaiman, N., Adnan, M. (2006). Combustion modeling of an industrial municipal waste combustor. International Journal of Environmental Studies, Taylor and Francis, 63(3): 313-329. Indexed in Scopus Cited =3

50. Hussain A., Ani, F.N, Darus, A.N., Mokhtar, H., Azam, S. and Mustafa, A. (2006) Thermochemical Behaviour of the Oil Palm Shell Waste in a Circulating Fluidized Bed Combustor (CFBC). Journal of Oil Palm Research., 18(1),:210-218 Imapact Factor =0.237

51. Hussain, A., Ani, F.N., Darus, A.N., Mustafa A. and Salema AA. (2005) Simulation studies of gas-solid in the riser of a circulating fluidized bed. Proceedings of the 18th International Conference on Fluidised Bed Combustion, 22-25 May, Toronto, Ontario, Canada Indexed in SCOPUS Cited =3

52. Hussain, A., Ani, F.N, Darus, A.N., Mokhtar, H. and Azam, S. (2006) Thermogravimetric and kinetic study on the pyrolytic process of oil palm solid waste. Journal of Industrial Technology., 15 (1): 87-99 . Indexed in SCOPUS

53. Soomro, A., Samo, S.R., Hussain, A. (2012) Fluidization in Cold Flow Circulating Fluidized Bed System, Energy, Environment and Sustainable System, SpringerLink, 161-173, DOI:10.1007/978-3-7091-0109-417

54. Hussain, A., Ani, F.N. and Darus, A.N. (2005) Flow modelling to investigate the effect of riser exit geometries on the riser hydrodynamics of a CFB. Journal of Mechanical Engineering. 34: 1-10.

55. Hussain, A., Ani, F.N., Darus, A. N. and Ahmad, Z. (2006). Thermogravimetric and thermochemical studies of Malaysian oil palm shell waste. Jurnal Teknologi A., 45 (A), Universiti Teknologi Malaysia.

56. Hussain, A., Ani, F.N., Darus, A.N., Adnan, M. F. and Mustafa, A. (2006). Hydrodynamic and fluidization behaviour in a circulating fluidized bed. International Journal of Mechanical and Materials Engineering 1(1):18-23.

57. Ahmad Hussain, Dheya AlOthmany ( 2013) Design of Thermal Loop of a Compact Reactor, International Journal of Engineering and Advanced Technology Research Vol. 1, No. 1, pp. 1-10: Published by European Centre for Research Training and Development, UK (www.ea-journals.org)

58. Ahmad Hussain, Dheya Al-Othmany (2013) Assessment of Aging of Zr-2.5Nb Pressure Tubes for Use in Heavy Water Reactor, Journal of Natural Sciences Research, Vol. 3, No. 2: 98-103

59. Ahmad Hussain, Dheya Al-Othmany (2013) Treatment and Conditioning of Spent Ion Exchange Resin from Nuclear Power Plant, Journal of Advances in Physics Theories and Applications, Vol. 15: 79-89

60. Hussain, A. (2012) CFD Modeling of Grate Furnace Designs for Municipal Solid Waste Combustion, Journal of Asian Transaction on Engineering, 2(3):41-50

61. Ahmad Hussain, Hani Hussain Sait (2012) CFD Modeling of the Dry Spent Fuel Storage of a Pressurized Heavy Water Reactor Mathematical Theory and Modeling, Vol.2, No.10: 11-20

62. M. Bassyouni, F. H. Akhtar, Hussain A. and A. Umer (2012) Biodiesel Production and Investigations on the Performance of Diesel Engine Using Jatropha Oil, Journal of Asian Transaction on Engineering, 2(3):77 – 88

63. Hussain, A., Akhtar, N. A (2011) Supervision and Evaluation Of Research Projects Of Graduate Students – Realities And Requirements, Journal of Quality and Technology Management, Vol. VIII, Issue 2: 123-137

64. Hussain, A., Nergis, Y. (2009) Quality Characterization and Magnitude of Pollution Implication in Textile Mills Effluents, Journal of Quality and Technology Management Vol. V(II): 27- 40

65. Sajjad Mubin, Ammad Hassan Khan and Ahmad Hussain (2008) Performance Optimization of Industrial Municipal Solid Waste Combustors – A Need of the Day to Convert Waste to Wealth, Journal of Pakistan Association for the Advancement of Science, 60 (12),1-10.

66. Hussain, A.,Velautham, S. (2008) Quality Assurance Criteria for Managers in Malaysian Energy Sector, Journal of Quality and Technology Management Vol. IV (II) 57-70

67. Hussain, A., Ani, F. N. (2007) Biomass Utilization for Green Environment: Co-combustion of Diesel Fuel and Producer Gas in Thermal Applications, Pakistan Journal of Scientific and Industrial Research,Vol. 50 (6):370-376 Indexed in SCOPUS

68. Nik, W.S., Hussain, A., Ani, F.N., Darus, F.N., Ali, Noraaini, A. and Eric, T.H.B. (2006) CFD modelling of industrial furnace designs for minimising emissions. Journal of Solid State Science and Technology Letters. 13(2): 204-205.

69. Hussain, A., Ani, F.N., Darus, A.N., Mokhtar, H., Azam, S., Sulaiman, N., Mustafa, A. and Ahmed, J. (2005) Thermogravimetric and Thermochemical studies of oil palm shell waste. Journal of the Pakistan Institute of Chemical Engineers. Vol. XXXIII: 1-7.

70. Hussain, A., Ani, F.N., Darus, A.N., Mokhtar, H., Azam, S., Sarpin, Z. and Ahmed, J. (2005) Combustion studies of Malaysian oil palm shell waste in a circulating fluidised bed combustor – Influence of primary air and CFBC temperature on emissions. Journal of the Pakistan Institute of Chemical Engineers. Vol. XXXIII: 27-39.

71. Hussain, A. and Ani, F.N. (2004) CFD flow modelling of riser exit geometries of a circulating fluidized bed. Mehran University Journal of Science & Technology. 24(3), pp 181-190.

72. Hussain, A., Ani, F. N., Darus, A.N., Mustafa, A., Akhtar, N.A. and Ahmed, J. (2004) Hydrodynamic Modeling of gas solid flow in the riser of a circulating fluidised bed using CFD. Journal of the Pakistan Institute of Chemical Engineers. Vol. XXXII: 75-82.

73. Hussain, A., and Ani, F.N. (2004). The effect of riser exit geometer on the hydrodynamics of a circulating fluidized bed. Mehran University Journal of Science & Technology. 24(2):141-148.

74. Hussain, A., Ani, F. N., Akhtar, N.A., Darus, A.N., Adnan, M.F., Mustafa, A., and Ahmed, J. (2004) Combustion Modeling of Municipal Waste Combustor in Malaysia. Journal of the Pakistan Institute of Chemical Engineers. Vol. XXXII: 1-11.
International and National Conference Proceedings

75. Bilal Soomro, Ahmad Hussain (2016) Modelling and Simulation of diffuser augmented wind turbine, Proceedings of the 4th International Conference on Energy, Environment and Sustainable Development November 01-03. 2016, Mehran University of Engineering and Technology, Jamshoro, Pakistan.

76. Azam Usto, Ahmad Hussain (2016) Production of Biofuel by Hydrothermal Liquefaction of Date PalmSeeds, Proceedings of the 4th International Conference on Energy, Environment and Sustainable Development November 01-03. 2016, Mehran University of Engineering and Technology, Jamshoro, Pakistan

77. Abdullah Alshehri, Ahmad Hussain (2016) Need of Energy Conversion Measures in Saudi Arabia and Methodology for Certification of Energy Personnel, Proceedings of the 6th International Mechanical Engineering Congress (SIMEC-2016)-15-16 July,2016, Karachi, Pakistan.

78. M. Ihsan Ul Haq, S.M. Khubaib, Umair Khalique, Ahmad Hussain (2016) Review of clean coal technologies for mitigation of carbon footprint,” Proceedings of the 4th International Conference on Environmental Horizons, Karachi, 2016.

79. Umair Khalique, M. Ihsan Ul Haq, S.M. Khubaib, Ahmad Hussain (2016) Customized maintenance strategy to reduce the greenhouse gases emissions in domestic generators,” Proceedings of the 4th International Conference on Environmental Horizons, Karachi, 2016.

80. S.M. Khubaib, M. Ihsan Ul Haq, Umair Khalique, Ahmad Hussain (2016) Economic and payback period evaluation of replacement of conventional lighting system with LEDs paired with solar energy,” Proceedings of the 4th International Conference on Environmental Horizons, Karachi, 2016.

81. Mumtaz Ahmad, M. Ihsan ul Haq, Naveed Hussain, M. Tayyab Muneeb, Ahmad Hussain, Azeemuddin (2015) CFD analysis of a low head micro hydro kinetic turbine for northern areas of Pakistan, MDSRC – 2015 proceedings, 14-15 November, 2015 Wah/Pakistan

82. Ahmad Hussain, Majid Almotairi (2012) Effect of changing fuels on the combustion performance of an industrial boiler. Proceedings of the Winter Enrichment Program- Poster Competition, King Abdullah University, Thuwal, KSA, 21-28 January, Saudi Arabia.

83. Hani H. Sait, Ahmad Hussain (2012) Effects of Feeding Tubes Arrangement, Falling Film Behavior and Backsplash on Ice Formation around Horizontal Tubes Bundles, Proceedings of the International Conference on Nuclear & Renewable Energy Resources (NuRER) 2012, 20-23 May, Istanbul, Turkey.

84. Ahmad Hussain, Hani Sait, Afzal Haque, Sadiq Hussain (2012) Combustion Performance of Low Grade Duki Coal from Baluchistan, Proceedings of the UK-Pakistan Coal Conference, University of Leeds, 2-4 July, United Kingdom.

85. Abdullah, A.S., Hussain, A., Hani, H. S. (2012) THE EXISTENCE OF ENERGY MANAGERS IN AN INDUSTRY – A Need of the Time in the Energy Starved Environment- Proceedings of the HEFAT 2012, 16-18 July, Malta.

86. Sait, H. H, Hussain, A. (2011) Estimation Of Flow Accelerated Corrosion (FAC) in Feeder Pipes Using CFD Software FLUENT and its Low Temperature Experimental Determination, Proceedings of the Universiti Malaysia Terengganu 10th International Annual Symposium (UMTAS 2011), 11-13 July 2011., Malaysia.

87. Hussain, A., Ahmad, S. (2010) CFD Modeling of Dry Spent Fuel Storage of a Pressurized Heavy Water Reactor, Proceedings of the 7th International Bhurban Conference on Applied Sciences & Technology, Organized by National Centre for Physics, Quaid-e-Azam University and CESAT, Islamabad., 11-14 January
88. Hussain, A. (2010) Next Generations of Nuclear Power Plants – Realities & Requirements, Proceedings of the Institution of Electrical & Electronics Engineers (IEEEP) Symposium, Organized by IEEEP, Karachi Centre, 17-18 March.

89. Hussain, A. (2010) Role of Energy Mangers in Our industry and Energy Conservation Studies for a Typical Power Plant, Proceedings of the Third National Conference on Energy Resources of Pakistan, Organized by Quaid-e-Awam University, Nawabshah, 18-20 March

90. Hussain, A., Nik, W.S., Ani, F.N., Darus, F.N., Ali, Noraaini, A. and Eric, T.H.B. (2006) CFD modelling of industrial furnace designs for minimising emissions. Proceedings of the International Conference on Solid State Science and Technology (ICSSST), 4-6 September, Kuala Terengganu, Malaysia.

91. Hussain, A., Ani, F.N, Darus, A.N., Mokhtar, H., Azam, S., Sulaiman, N. and Mustafa, A. (2006). An investigation into the thermochemical behaviour of the Malaysian oil palm shell wastes & coal blends and its combustion studies in a circulating fluidized bed. Proceedings of the International Conference on Agricultural Wastes, 21-22 March, Faculty of Environment Studies, Universiti Putra Malaysia, Serdang, Malaysia.

92. Hussain, A. and Ani, F.N. (2006) Co-Combustion of Diesel Fuel Oil and Producer Gas from Biomass Gasification for Thermal Applications. Proceedings of the Pakistan Oil Gas and Energy Exhibition 2006 (POGEE 2006), 18-19 May, Karachi, Pakistan.

93. Hussain, A., Ani, F.N. and Darus, A.N. (2006) Pyrolysis Characteristics and Kinetics of Palm Shell Waste Mixtures with Mukah Balingian Coal. Proceedings of the International Conference on Energy and Environment (ICEE 2006), 28-30 August, Universiti Tenaga Nasional, Kajang, Malaysia.

94. Hussain, A., Ani, F.N. and Darus, F.N. (2006) Pyrolysis behaviour and kinetics of palm shell waste mixtures with low grade coal and its combustion studies in a circulating fluidised bed. Proceedings of the Seminar on Energy from Biomass 2006, Organised by Forest Research Institute of Malaysia (FRIM), 25-26 July, Kepong, Kuala Lumpur.

95. Hussain, A., Sani, W.N., Ani, F.N. and Wahid, M.K. (2006) An Investigation into the Thermogravimetric Analysis and Kinetic Parameters of the Sarawak Coal and its Blends with Oil Palm Shell Waste. Proceeding of the KUSTEM 5th Annual Seminar on Sustainability Science and Management, 2-3 May, Kuala Terengganu, Malaysia.

96. Ani, F.N., Hussain, A., Yi, L.X. and Mohamed, A.F. (2006) Combustion of diesel fuel and producer gas in thermal applications. Proceedings of the National Conference & Expo 2006 – Waste to Wealth, 10-11 July, Kuala Lumpur, Malaysia.

97. Hussain, A., Ani, F.N., Darus, A.N., Puad, M. and Katiravale, S. (2006) Thermogravimetric and Kinetic Studies of Sarawak Coals and its Blends with Oil Palm Shell Waste. Proceedings of the National Conference & Expo 2006 – Waste to Wealth, 10-11 July, Kuala Lumpur, Malaysia.

98. Hussain, A., Ani, F.N. and Darus, A.N. (2006) Thermal Behaviour of Coal/Biomass Blends during Co-Pyrolysis. Proceedings of the 1st Regional Post Graduate Conference on Engineering and Science 2006 (RPCES 2006), 26-27 July, Universiti Teknologi Malaysia, Johor Bharu, Malaysia.

99. Hussain, A., Ani, F.N. and Darus, A.N. (2006) Investigation on Co-Combustion Characteristics of Palm Shell Waste and Coal in Circulating Fluidized Bed Combustor. Proceedings of the 1st Regional Post Graduate Conference on Engineering and Science 2006 (RPCES 2006), 26-27 July, Universiti Teknologi Malaysia, Johor Bharu, Malaysia.

100. Hussain, A., Ani, F.N., Mustafa, A., Mamat, Z.A., Zardi, Z. and Aziz, A. (2005) Combustion studies of blended fuel oil as an alternative fuel for industrial gas turbines (AFTUR) and controlling NOx and soot emissions. Proceedings of the3rd Pakistan’s Oil, Gas and Energy Exhibition (POGEE), 19-20 May, Karachi, Pakistan.

101. Hussain, A., Ani, F.N., Darus, A.N., Mustafa A. and Salema AA. (2005) Simulation studies of gas-solid in the riser of a circulating fluidized bed. Proceedings of the 18th International Conference on Fluidised Bed Combustion, 22-25 May, Toronto, Ontario, Canada

102. Hussain, A., Ani, F.N. and Darus, A.N. (2005) Fluidization characteristics of a circulating fluidized bed. Proceedings of the National Mechanical Engineering Conference (NAME ‘05), 18-20 May, University Teknologi Mara, Malaysia, 391-400

103. Hussain, A., Ani, F.N. and Darus, A.N. (2005) Hydrodynamics of a circulating fluidized bed. Proceedings of the International conference in recent advances in Mechanical and Materials Engineering (ICRAMME 2005), 30-31 May, University of Malaya, Malaysia.

104. Hussain A., Ani, F.N, Darus, A.N., Mokhtar, H., Azam, S., Sarpin, Z. and Mustafa, A. (2005) Experimental and numerical studies of fluidization in a circulating fluidized bed. Proceedings of the International Energy Conference, 5-7 August, Jakarta, Indonesia.

105. Hussain A., Ani, F.N, Darus, A.N., Mokhtar, H., Azam, S., Sarpin, Z. and Mustafa, A. (2005) Combustion studies of the palm shell waste powder in a circulating fluidized bed combustor (CFBC) – influence of primary air and CFBC temperature on emissions. Proceedings of the International Energy Conference, 5-7 August, Jakarta, Indonesia.

106. Hussain, A., Ani, F.N., Darus, A. N. and Mustafa, A. (2005). Experimental and computational studies of the hydrodynamics of the riser of a CFB, Proceedings of the Brunei International Conference on Engineering and Technology (BICET 2005), 15-18 August, Brunei Darussalam.

107. Azam, S., Hussain, A., Ani, F.N, Darus, A.N., Mokhtar, H., Sulaiman, N. and Mustafa, A. (2005) Utilization of oil palm shell waste in a circulating fluidized bed combustor (CFBC). Proceedings of the International Advanced Technology Congress, Universiti Putra Malaysia, 6-8 December, Kuala Lumpur, Malaysia.

108. Hussain, A., Ani, F.N. and Darus, A.N. (2004) Flow modelling to investigate the effect of riser exit geometries on the riser hydrodynamics of a circulating fluidized bed. Proceedings of the International Conference on Scientific and Engineering Computation, June 30 – July 02 Singapore.

109. Hussain, A., Ani, F.N. and Darus, A.N. (2004). Turbulence modelling of a circulating fluidized bed. Proceedings of the 17th International symposium on Analytical Science: Trends, Challenges and Opportunities, 24-26 August, 2004, Kuantan, Malaysia.

110. Hussain, A., Ani, F.N. and Darus, A.N. (2004) Simulation of Gas-Solid Flow Behaviour in the Riser Section of a circulating Fluidized Bed using Computational Fluid Dynamics Software. Proceedings of the JGSEE and Kyoto University Conference on Sustainable Energy and Environment (SEE), 1-3 December, Thailand.

111. Hussain, A., Ani, F.N. and Darus, A.N. (2004) A computational study of the hydrodynamics of a circulating fluidized bed using CFD software FLUENT. Proceedings of the 7th Asia-Pacific International Symposium on Combustion and Energy Utilization (7th APISCEU), 15-17 December, Hong Kong.

112. Hussain, A. and Ani, F.N. (2004) A computational study of gas-solid flow in the riser of a circulating fluidized bed. Proceedings of the KUSTEM 3rd annual seminar: Role of Environment Sciences and Technology in Sustainable Development of Resources, 4-5 May, Terengganu, Malaysia.

113. Hussain, A., Ani, F.N., Adnan, M.F., Surjosatyo, A., Mustafa, A. and Nik, W.B. (2004) CFD modelling of an industrial municipal solid waste combustor. Proceedings of the Symposium of Malaysian Chemical Engineers (SOMChE 2004), December 13-14, Universiti Teknologi PETRONAS, Ipoh, Perak, Malaysia.

114. Hussain, A., Ani, F.N., Darus, A N., Mustafa, A. and Nik, W.B. (2004) Numerical study on the influence of various physical parameters over the gas solid two phase flow in the 3D riser of a circulating fluidized bed. Proceedings of the Symposium of Malaysian Chemical Engineers (SOMChE 2004), December 13-14, Universiti Teknologi PETRONAS, Ipoh, Perak, Malaysia.

115. Nik, W.B., Ani, F. N., Masjuki, H H., Hussain, A. and Bulat, K. H. (2004) Thermal stability of crop oil as energy transport media in hydraulic system. Proceedings of the Symposium of Malaysian Chemical Engineers (SOMChE 2004), December 13-14, Universiti Teknologi PETRONAS, Ipoh, Perak, Malaysia.

 

Ms Rabia Mumtaz

Senior Lecturer

MS (Management Sciences), Pakistan

MBA (Finance), Pakistan

Email: rabia.mumtaz@dsu.edu.pk

EXT:337

Engr. Dr. Shahzad Ashraf

Associate Professor

 
  • Academic Background:
  • Ph.D. (Information and Communication Engineering, Hohai University Changzhou, China
  • ME (Computer Communications and Networks), Mehran UET, Jamshoro Pakistan
  • BE(Computer Systems Engineering), Mehran UET, Jamshoro Pakistan Research Interests:
  • Wireless Communication
  • Underwater Sensors
  • Artificial Intelligence
  • Computer Vision
  • Computer Networks Research Journal Editorial role
  • KSII Transactions on Internet and Information Systems
    Frontiers in Computer Science
    IEICE Electronics Express
    Journal of Information Analysis
    BOHR Journal of Computational Intelligence and Communication Network
    Green and Environmentally Friendly New Technologies (GEFNT)
    Microsystem Technologies
    Wireless personal communication
    Electrical Science and Engineering
    i-manager’s Journal on Wireless Communication Networks (JWCN)
    Cognitive Studies | Etudes Cognitives
    Software Engineering and Applications (JSEA)
    Computational Research Progress in Applied Science & Engineering
    Intellectual Advancements and Research in Engineering Computations
    Journal of Computational and Cognitive Engineering
  • Research Profile:
  • Research Gate: https://www.researchgate.net/profile/Shahzad_Ashraf3
    Google Scholar: https://scholar.google.com/citations?user=6sMp4-cAAAAJ&hl=en
    Web of Science:   AAD-1652-2020
    Scopus:   57193631627
    ORCID:  0000-0002-7637-7870
  • Technical Skills:
  • Computer hardware, network deployment and administration, Windows Server Configuration and Administration, Office automation, PhotoshopEmail :
  • nfc.iet@hotmail.com
  • shahzad.ashraf@dsu.edu.pk
  • Journal Publications
    1. Shahzad Ashraf, Furqan Memon, Fouzia Akram, Zeeshan Rasheed, Shahzad Sarwar Bhatti, and Inam Ullah. “Development of Sustainable Wireless Resource Model through Shrewd Neural Network.” Data Intelligence. China Science Publishing & Media Ltd., August 1, 2024. https://doi.org/10.3724/2096-7004.di.2024.0034.
    2. Shahzad Ashraf, Mingsheng Gao, Zhengming Chen, Hamad Naeem, Arshad Ahmad and Tauqeer Ahmed, (2020). “Underwater Pragmatic Routing Approach Through Packet Reverberation Mechanism,” IEEE Access, vol. 8, pp. 163091-163114, doi:  https://doi.org/10.1109/ACCESS.2020.3022565
    3. Shahzad Ashraf, Syed Haider Aqeel, Raja Masood Larik, Nusrat Husain, Hafiz Abdul Muqeet, Usman Humayun, Ashraf Yahya, Zeeshan Ahmad Arfeen, and Muhammad Farhan Khan. 2023. “An Improved Multimodal Biometric Identification System Employing Score-Level Fuzzification of Finger Texture and Finger Vein Biometrics” Sensors 23, no. 24: 9706. https://doi.org/10.3390/s23249706
    4. Shahzad Ashraf, Syed Kanza Mehak, Zeeshan Rasheed, Naeem Ahmed Ibupoto.(2024). Machine Learning Algorithms For Prediction Of Thyroid Syndrome At Initial Stages In Females. In Kurdish Studies (pp. 466–470). Green Publication. https://doi.org/10.53555/ks.v12i5.3247
    5. Shahzad Ashraf, Tauqeer Ahmed, Asif Raza, Hamad Naeem, (2020). “Design of Shrewd Underwater Routing Synergy Using Porous Energy Shells” MDPI: Smart Cities, 3, no. 1: 74-92. doi: https://doi.org/10.3390/smartcities3010005
    6. Shahzad Ashraf, Tehseen Mazhar, Rizwana N. Asif, M. Amir Malik, M. Asgher Nadeem, Inayatul Haq, Muhammad Iqbal, and Muhammad Kamran. Electric Vehicle Charging System in the Smart Grid Using Different Machine Learning Methods. Sustainability 2023, 15(3), 2603. https://doi.org/10.3390/su15032603
    7. Shahzad Ashraf, Zeeshan Rasheed, Naeem Ahmed Ibupoto, Pinial Khan Butt, and Emad Hussen Sadiq. 2022. “SDS: Scrumptious Dataflow Strategy for IoT Devices in Heterogeneous Network Environment” Smart Cities 5, no. 3: 1115-1128. https://doi.org/10.3390/smartcities5030056
    8. Shahzad Ashraf, Rabbani, Muhammad Junaid, Attaullah Y. Memon, Muhammad Farhan, Raja Masood Larik, Muhammad Burhan Khan, and Zeeshan Ahmad Arfeen. 2024. “Robust Output Feedback Stabilization and Tracking for an Uncertain Nonholonomic Systems with Application to a Mobile Robot” Sensors 24, no. 11: 3616. https://doi.org/10.3390/s24113616
    9. Shahzad Ashraf, Arshad Ahmad, Ayaz Ullah, Chong Feng, Muzammil Khan, Muhammad Adnan, Shah Nazir, and Habib Ullah Khan. (2020), “Towards an Improved Energy Efficient and End-to-End Secure Protocol for IoT Healthcare Applications”, Security and Communication Networks, vol. 2020, 10 pages, doi: https://doi.org/10.1155/2020/8867792
    10. Shahzad Ashraf, Mingsheng Gao, Zhengming Chen., Tauqeer Ahmed, Asif Raza, & Hamad Naeem, (2020). USPF: Underwater Shrewd Packet Flooding Mechanism through Surrogate Holding Time. Wireless Communications and Mobile Computing, 1–12, doi:  https://doi.org/10.1155/2020/9625974
    11. Shahzad Ashraf, Omar Alfandi, Arshad Ahmad, Asad Masood Khattak, Bashir Hayat, Kyong Hoon Kim, and Ayaz Ullah, “Bodacious-Instance Coverage Mechanism for Wireless Sensor Network”, Wireless Communications and Mobile Computing, (2020), 11 pages, 2020. https://doi.org/10.1155/2020/8833767
    12. Shahzad Ashraf, Obaid, Hafiz Muhammad, Muhammad Asgher Nadeem, Hifsa Shahid, Adeel Akram, and Muhammad Zafrullah. “Performance Analysis of a Hybrid Optical Amplifier Based 480-Gbps DWDM-FSO System under the Effect of Different Atmospheric Conditions.” Frontiers in Computer Science. Frontiers Media SA, February 7, 2024. https://doi.org/10.3389/fcomp.2024.1348024
    13. Shahzad Ashraf, Mingsheng Gao, Zhengming Chen, Hamad Naeem, and Tauqeer Ahmed, (2022). “CED-OR Based Opportunistic Routing Mechanism for Underwater Wireless Sensor Networks”, Wireless Personal Communications (2022). https://doi.org/10.1007/s11277-022-09561-w
    14. Shahzad Ashraf, Muhammad Ashfaq Khan, Fayaz Ali Dharejo, Farah Deeba, Juntae Kim, and Hoon Kim. (2021), “Toward developing tangling noise removal and blind inpainting mechanism based on total variation in image processing”, Electronics Letters, doi: https://doi.org/10.1049/ell2.12148
    15. Shahzad Ashraf, Sehrish Saleem, Tauqeer Ahmed, Zeeshan Aslam and Durr Muhammad. Conversion of adverse data corpus to shrewd output using sampling metrics. Visual Computing for Industry Biomedicine and Art 3, 19 (2020). doi: https://doi.org/10.1186/s42492-020-00055-9
    16. Shahzad Ashraf, Sehrish Saleem, Tauqeer Ahmed, & Zeeshan A. Arfeen, (2022). Succulent link selection strategy for underwater sensor network. International Journal of Computing Science and Mathematics (Vol. 15, Issue 3, p. 224). Inderscience Publishers. https://doi.org/10.1504/ijcsm.2022.10049407
    17. Shahzad Ashraf, Zeeshan Ahmad Arfeen, Usman Ullah Sheikh, Mehreen Kausar Azam, Rabia Hassan, Hafiz Muhammad Faisal Shehzad, Md Pauzi Abdullah, and Lubna Aziz, (2020). “A comprehensive review of modern trends in optimization techniques applied to hybrid microgrid systems”, Concurrency and Computation: Practice and Experience, doi: https://doi.org/10.1002/cpe.6165
    18. Shahzad Ashraf, Muhammad Zuhair, Mahnoor Iqbal, Syed Zain Raza, Alief  khokhar, & Muhammad Asgher Nadeem (2023). BROACHING UNCOUTH WATER LEVEL SNAG IN UNDERGROUND AGRICULTURE FIELD THROUGH WIRELESS SENSORS. Suranaree Journal of Science and Technology (Vol. 30, Issue 4, p. 010248(1-16)). Suranaree University of Technology. https://doi.org/10.55766/sujst-2023-04-e0855
    19. Shahzad Ashraf, Asif Raza, Zeeshan Aslam, Hamad Naeem, and Tauqeer Ahmed, (2020), Underwater Resurrection Routing Synergy using Astucious Energy Pods. Journal of Robotics and Control (JRC), 1(5). doi: https://doi.org/10.18196/jrc.1535
    20. Shahzad Ashraf, Arshad Ahmad, Adnan Yahya, and Tauqeer Ahmed, (2020). “Underwater Routing Protocols: Analysis of Link Selection Challenges” AIMS Electronics and Electrical Engineering. 4, no. 3: 234–248. doi: https://doi.org/10.3934/electreng.2020.3.234
    21. Rizwan Tariq, Rao M. Asif, Ateeq Ur Rehman, Muhammad Abu Bakar Siddique, Adeel Asad, Shahzad Ashraf (2020), Organic Power Generation and Utilization Using Anaerobic Digestion Process” Journal of Applied and Emerging Sciences, Vol (10), Issue (02), PP-126–132. doi: https://doi.org/10.36785/buitems.jaes.408
    22. Shahzad Ashraf, Mingsheng Gao, Zhengming Chen, Syed Kamran Haider and Zeeshan Raza, (2017). “Efficient Node Monitoring Mechanism in WSN using Contikimac Protocol” International Journal of Advanced Computer Science and Applications (IJACSA), 8(11), doi: https://doi.org/10.14569/IJACSA.2017.081152
    23. Shahzad Ashraf. (2021). A Proactive role of IoT devices in building Smart Cities. Internet of Things and Cyber-Physical Systems. https://doi.org/10.1016/j.iotcps.2021.08.001
    24. Shahzad Ashraf, Tauqeer Ahmed and Sehrish Saleem, NRSM: Node redeployment shrewd mechanism for wireless sensor network, (2020), Iran Journal of Computer Science doi: https://doi.org/10.1007/s42044-020-00075-x
    25. Shahzad Ashraf, Tauqeer Ahmed, Zeeshan Aslam, Durr Muhammad, Adnan Yahya, Muhammad Shuaeeb, (2020). Depuration‎ based Efficient Coverage Mechanism for ‎Wireless Sensor Network. Journal of Electrical and Computer Engineering Innovations (JECEI), 8(2), 145-160. doi: https://doi.org/10.22061/jecei.2020.6874.344
    26. Shahzad Ashraf, and Durr Muhammad,(2024) Time based Meticulous analysis of pandemic spreading ratio using Simpy framework. COMMICAST, 5(1), 136–147. https://doi.org/10.12928/commicast.v5i1.10044
    27. Shahzad Ashraf, Sehrish Saleem, Tauqeer Ahmed, “Sagacious Communication Link Selection Mechanism for Underwater Wireless Sensors Network”, International Journal of Wireless and Microwave Technologies (IJWMT), (2020), Vol.10, No.4, pp. 22-33, doi: https://doi.org/10.5815/ijwmt.2020.04.03
    28. Shahzad Ashraf. (2020), “Culminate Coverage for Sensor Network through Bodacious-Instance Mechanism”, i-manager’s Journal on Wireless Communication Networks, 8(3), 1-9, doi: https://doi.org/10.26634/jwcn.8.3.17310
    29. Shahzad Ashraf and Tauqeer Ahmed, (2020). “Dual-nature biometric recognition epitome”, Trends in Computer Science and Information Technology, 5(1): 008-014. doi: https://doi.org/10.17352/tcsit.000012
    30. Shahzad Ashraf and Zeeshan Aslam, “Data leakage analysis in wireless networks using Super-vised and Unsupervised Testing”, Innovation y Software., vol. 4, no. 2, pp. 52-62, Sep. 2023. doi:  https://doi.org/10.48168/innosoft.s12.a108
    31. Shahzad Ashraf. (2020), “Towards Shrewd Object Visualization Mechanism” Trends in Computer Science and Information Technology 5(1): 097-102. doi: https://doi.org/10.17352/tcsit.000030
    32. Shahzad Ashraf, Zeeshan Aslam, Adnan Yahya, and Adnan Tahir, (2020). “Underwater Routing Protocols Analysis of Intrepid Link Selection Mechanism, Challenges and Strategies”, International Journal of Scientific Research in Computer Science and Engineering, 8(2), 1–9. doi: https://doi.org/10.26438/ijsrcse/v8i2.19
    33. Shahzad Ashraf, Tauqeer Ahmed, Sehrish Saleem, and Zeeshan Aslam. (2020), “Diverging Mysterious in Green Supply Chain Management”, Orient. Journal of Computer Science and Technology, 13(1). doi: https://doi.org/10.13005/ojcst13.01.02
    34. Shahzad Ashraf and Tauqeer Ahmed, (2020). “Machine Learning Shrewd Approach for an Imbalanced Dataset Conversion Samples” Journal of Engineering and Technology (JET), vol. 11, no. 1, Available:  https://jet.utem.edu.my/jet/article/view/5896
    35. Shahzad Ashraf, Zeeshan Aslam, Sehrish Saleem, Syed Afnan and Muhammad Aamer. (2020), “Multi-biometric Sustainable Approach for Human Appellative”, Computational Research Progress in Applied Science & Engineering, CRPASE: Transactions of Electrical, Electronic and Computer Engineering, 6, pp-146–152. Availablehttp://www.crpase.com/viewmore.php?pid=165&title=Multibiometric%20Sustainable%20Approach%20for%20Human%20Appellative
    36. Shahzad Ashraf, Zeeshan Rasheed, Muhammad Arbaz. (2022), Adopting proactive results by developing the Shrewd model of pandemic COVID-19. Archives of Community Medicine and Public Health 8(2): 062-067. doi:  https://doi.org/10.17352/2455-5479.000175
    37. Shahzad Ashraf, Zeeshan A. Arfeen, Muhammad A. Khan, & Tauqeer Ahmed, (2020). “SLM-OJ: Surrogate Learning Mechanism during Outbreak Juncture”, International Journal for Modern Trends in Science and Technology, 6(5), 162–167. doi: https://doi.org/10.46501/ijmtst060525
    38. Shahzad Ashraf. Avoiding Vulnerabilities and Attacks with a Proactive Strategy for Web Applications. Advances in Robotics & Mechanical Engineering, 3(2)- 2021. ARME.MS.ID.000157. doi: https://doi.org/10.32474/ARME.2021.03.000157
    39. Shahzad Ashraf, Sehrish Saleem and Syed Afnan. (2020), “FTMCP: Fuzzy based Test Metrics for Cosmetology Paradigm”, Advanced Computational Intelligence: An International Journal (ACII), 7(4), 01–13. doi: https://doi.org/10.5121/acii.2020.7401
    40. Shahzad Ashraf, Sehrish Saleem, Syed Afnan, and Muhammad K. Basit. (2020), “CMBA – A Candid Multi-Purpose Biometric Approach”, ICTACT Journal on Image and Video Processing, vol. 11, no. 01, pp-2211-2216, doi: https://doi.org/10.21917/ijivp.2020.0317Available onlinehttps://ictactjournals.in/ArticleDetails.aspx?id=4534
    41. Shahzad Ashraf, Durr Muhammad, Muhammad A. Khan, and Tauqeer Ahmed. (2020), “Fuzzy based efficient Cosmetology Paradigm” International Journal of Multidisciplinary and Current Research, vol. 8, pp-513-520, doi: https://doi.org/10.14741/ijmcr/v.8.4.3Available onlinehttp://ijmcr.com/fuzzy-based-efficient-cosmetology-paradigm
    42. Shahzad Ashraf, Emad Hussen Sadiq, Zeeshan Aslam, Durr Muhammad. Fuzzy based multi-line Power Outage Control System.  Journal of Critical Reviews (JCR). 2021; 8(2): 1421-1431. doi: https://doi.org/10.31838/jcr.08.02.143Available onlinehttps://www.jcreview.com/paper.php?slug=fuzzy-based-multi-line-power-outage-control-system
    Conference Proceedings
    01 Shahzad Ashraf and Tauqeer Ahmed, “Sagacious Intrusion Detection Strategy in Sensor Network,” (2020) International Conference on UK-China Emerging Technologies (UCET), Glasgow, United Kingdom, 2020, pp. 1-4,doi: https://doi.org/10.1109/UCET51115.2020.9205412
    02 Shahzad Ashraf, Sehrish Saleem, Tauqeer Ahmed, Zeeshan Aslam and Muhammad Shuaeeb, “Iris and Foot based Sustainable Biometric Identification Approach,” (2020) International Conference on Software, Telecommunications and Computer Networks (SoftCOM), Split, Hvar, Croatia, 2020, pp. 1-6, doi: https://doi.org/10.23919/SoftCOM50211.2020.9238333
    03 Shahzad Ashraf, Zeeshan Raza, Kamran Liaquat and Hasnain Kashif. (2016), “Monitoring of soldier’s health and transmission of secret codes”, 2016 Sixth International Conference on Innovative Computing Technology (INTECH), Dublin,  Ireland. doi: https://doi.org/10.1109/INTECH.2016.7845019
    04 Shahzad Ashraf, Syed Haider, Min Jiang and Inam Ullah. (2017), “Study on Detection of P300 ERP Component in EEG Signals and Algorithms”, Proceedings of the 3rd Annual International Conference on Electronics, Electrical Engineering and Information Science (EEEIS 2017) doi: https://doi.org/10.2991/eeeis-17.2017.49
  • Book Chapter
  • 01 Shahzad Ashraf, Irshad Khalil,  Inam Ullah, Ijaz Khan. Future Communication Systems Using Artificial Intelligence, Internet of Things and Data Science. Taylor & Francis.

Dr. Razi Sultan Siddiqui

Director Student Counselling & Development, Postgraduate Programs Coordinator, Department of Humanities and Social Sciences

Qualification

  • Awardee National Post-Doctoral Fellowship
  • PhD (Psychology)
  • MS (Management Sciences)
  • MBA (HRM & Marketing)
  • MSc (Psychology)
  • BSc (Hons) in Psychology

Research Interests:

  • Diagnosing and Treating Mental Health Disorders, Depression, Anxiety and Stress
  • Exploring Behavior in Family Contexts, Gender, and Marital Relations
  • Examining Learning and Development in Educational Settings, Bullying, Self-Harm, Substance Use Disorders
  • Studying Workplace Behavior, Self-esteem, Emotional Intelligence
  • Promoting Health and Preventing Illness

Publications:

  1. Siddiqui, R. S., Shah, I,. (2012) A Gender based Comparison Between Married and Unmarried Young Adults International Research Journal of Arts & Humanities ISSN: 1016-9342 Vol. 40, No. 40. (HEC Recognized: “Y Category”)
  2. Siddiqui, R. S., & Hassan, A., (2012) Relationship between Job Satisfaction and Employee Turnover Intention Global Management Journal for Academic & Corporate Studies ISSN: 2219-6145 Vol. 2, Issue 1, 2012. (HEC Recognized: “Y Category”)
  3. Siddiqui, R. S., Hassan, A., & Syed, N. A., (2013) Impact of Emotional Intelligence on Employees Turnover Rate in FMCG Organizations Pakistan Journal of Commerce and Social Sciences ISSN: 1997-8553 Vol. 7, No. 2. (HEC Recognized: “Y Category”)
  4. Krys, K., Capaldi, C. A., van Tilburg, W., Lipp, O. V., Bond, M. H., Vauclair, M., Siddiqui, R. S., …, Ahmed, R. A., (2017) Catching up with wonderful women: The women-are-wonderful effect is smaller in more gender egalitarian societies. International Journal of Psychology. http://dx.doi.org/10.1002/ijop.12420 (Research Journal: International Journal of Psychology, Publisher: Wiley-Blackwell, Impact Factor: 1.867 , HEC Recognized: “W Category)
  5. Conroy-Beam, D., Buss, D. M., Asao, K., Sorokowska, A., Sorokowski, P., Aavik, T., Siddiqui, R. S., … Zupančič, M. (2019). Contrasting Computational Models of Mate Preference Integration Across 45 Countries. Scientific Reports, 9(1). https://doi.org/10.1038/s41598-019-52748-8 (Research Journal: Scientific Reports, Publisher: Nature Research, Impact Factor: 3.998, HEC Recognized: “W Category”)
  6. Conroy-beam, D., Roney, J. R., Lukaszewski, A. W., Buss, D. M., Asao, K., Sorokowska, A., Siddiqui, R. S.,… Zupančič, M. (2019). Assortative mating and the evolution of desirability covariation. Evolution and Human Behavior, https://doi.org/10.1016/j.evolhumbehav.2019.06.003 (Research Journal: Evolution and Human Behavior, Publisher: ELSVIER, Science Direct, Impact Factor: 2.959, HEC Recognized: “W Category”) 
  7. Siddiqui, R. S., Jahangir, A. A., & Hassan, A. (2019). Gender Differences on Perceived Social Support and Psychological Distress among University Students. Global Management Journal for Academic & Corporate Studies, 9(2), 148–157 (HEC Recognized: “Y Category”)
  8. Walter, K. V., Conroy-Beam, D., Buss, D. M., Asao, K., Sorokowska, A., Sorokowski, P., Siddiqui, R. S., … Zupančič, M. (2020). Sex Differences in Mate Preferences Across 45 Countries: A Large-Scale Replication. Psychological Science. https://doi.org/10.1177/0956797620904154 (Research Journal: Psychological Science, Publisher: SAGE Publications, Impact Factor: 4.902, HEC Recognized: “W Category”)
  9. Walter, K. V., Conroy-Beam, D., Buss, D. M., Asao, K., Sorokowska, A., Sorokowski, P., Siddiqui, R. S., … Zupančič, M. (2020). Sex Differences in human mate Preferences vary across sex ratios. Procedings of the Royal Society B 228 (1995), 202 (Research Journal: Procedings of the Royal Society B, Publisher: The Royal Society, HEC Recognized: “W Category”)
  10. Sorokowska, A., Saluja, S., Sorokowski, P., Frąckowiak, T., Karwowski, M., Aavik, T., Siddiqui, R.S., … & Croy, I. (2021). Affective Interpersonal Touch in Close Relationships: A Cross-Cultural Perspective. Personality and Social Psychology Bulletin, https://doi:10.1177/0146167220988373. (Research Journal: Personality and Social Psychology Bulletin, Publisher: SAGE Publications, Impact Factor: 2.961, HEC Recognized: “W Category”)
  11. Siddiqui, R, S., Khan, A. A., Saad, M., Sultan, L. R. (2022). Analysis of Customer Satisfaction to Internal Ambiance of Vehicles using Predictive Analytic Modeling. (Resaech Journal: Sustainable Business and Society in Emerging Economies 4 (1), 231-246  (HEC Recognized: “Y Category”)
  12. P Sorokowski, M Kowal, RJ Sternberg, T Aavik, G Akello, MM Alhabahba, … Siddiqui, R, S., (2023). Modernization, collectivism, and gender equality predict love experiences in 45 countries. Scientific reports 13 (1), 773 (Research Journal: Scientific Reports, Publisher: Nature Research, Impact Factor: 3.998, HEC Recognized: “W Category”)
  13. KV Walter, D Conroy-Beam, DM Buss, K Asao, A Sorokowska, … Siddiqui, R, S., (2023). Correction to: ‘Sex differences in human mate preferences vary across sex ratios’ (2023) by Walter et al. (Research Journal: Proceedings of the Royal Society B 290 (2003) HEC Recognized: “W Category”)
  14. M Rizwan, M, Shah, I., Siddiqui, R, S., (2023). Religious (Salat) Behavior and Suicidality among Youth in Pakistan. Progressive Research Journal of Arts & Humanities (PRJAH) 5 (2), 69-80 (HEC Recognized: “Y Category”)
  15. Rizwan, M., Siddiqui, R. S., & Ali. (2017). Suicide Risk Potential: A Comparison of Psychiatric Patients and Normal Controls in Pakistan. Psychol Behav Sci Int J. 6(2): 555685. DOI: 10.19080/PBSIJ.2017.06.555685.
  16. Rizwan, M., Malik, S., Malik, J. N., & Siddiqui, S. R. (2017) Urdu Rosenberg Self-Esteem Scale: An Analysis of Reliability and Validity in Pakistan. Social Int J. 1(2): 00010. DOI: 10.15406/sij.2017.01.00010.

Contact Information:

Email: razi@dsu.edu.pk
razi_sultan@yahoo.com

Engr. Dr. Sunil Kumar

Assistant Professor and HoD

 

Education:

  • MS-PhD (Electrical Engineering) Hanyang University, South Korea
  • B.E. (Electrical Engineering) NED University

Research Interests:

Electric Machine Design, Optimization and Analysis

WORK EXPERIENCE:

  1. Assistant Professor
    Department of Electrical Engineering
    DHA Suffa University, Pakistan [10.2022 ~ to-date]

  2. Assistant Professor
    Faculty of Electrical Engineering
    Ghulam Ishaq Khan (GIK) Institute, Pakistan [09.2020 ~ 09.2022]

  3. Post-doctoral Researcher
    Korea Electronics Technology Institute (KETI), South Korea [09.2019 ~ 08. 2020]

  4. Trainee Engineer
    Karachi Electric Co. Ltd. (K.E.) – Distribution Region I, Karachi, Pakistan [05.2012 ~ 05.2013]

JOURNAL PUBLICATIONS:

  1. Sunil Kumar, Wenliang Zhao, Zhentao S. Du, Thomas A. Lipo, and Byung-il Kwon, “Design of Ultra-High Speed Axial Flux Permanent Magnet Machine with Sinusoidal Back-EMF for Energy Storage Application” in IEEE Transactions on Magnetics, vol. 51, no. 11, pp. 1-4, Nov. 2015.

  2. Sunil Kumar, Thomas A. Lipo, and Byung-il Kwon, “A 32,000 r/min Axial Flux Permanent Magnet Machine for Energy Storage with Mechanical Stress Analysis” in IEEE Transactions on Magnetics, vol. 52, no. 7, pp. 1-4, July 2016.

  3. Sunil Kumar, and Byung-il Kwon, “Design and Analysis of a Material Efficient Sinusoidal Consequent-Pole High-Speed Axial Flux Machine”, in Journal of IKEEE (KCI Indexed), vol. 22, No. 3, pp. 759-766, Sep-2018.

  4. Se-Hyun Rhyu, Sunil Kumar, Salman Khaliq, Myung-Hwan Yoon, Jeong-Eui Yun, and Sang-Seon Lee, “Design Optimization for Pullout Torque Improvement of a Magnetic Coupling in Chemical Pump Application”, Journal of Magnetics (SCIE/SCOPUS Indexed), Vol. 26. No. 01, pp. 60-66, Mar-2021. https://doi.org/10.4283/JMAG.2021.26.1.060

CONFERENCE PAPERS:

  1. Sunil Kumar, Wenliang Zhao, Zhentao S. Du, Thomas A. Lipo, and Byung-il Kwon “Design of Ultra-High Speed Axial Flux Permanent Magnet Machine with Sinusoidal Back-EMF” IEEE International Magnetics (INTERMAG) conference, Beijing, China, 11~15 May 2015.

  2. Sunil Kumar, Thomas A. Lipo, and Byung-il Kwon “A 32,000 rev/min Axial Flux Permanent Magnet Machine for Energy Storage with Mechanical Stress Analysis” IEEE Joint MMM/INTERMAG conference, San Diego, CA, USA, 11~15 Jan 2016.

  3. Sunil Kumar, Myeong-Hwan Yoon, Salman Khaliq, Se-Hyun Rhyu, “Magnetic Coupling PM Shape optimization for Pull-out Torque Improvement of a 50-hp Industrial Pump System” IEEE International Magnetics (INTERMAG) conference, Montreal, Canada, 2020.

  4. Sunil Kumar, Wenliang Zhao, Thomas A. Lipo, and Byung-il Kwon “Optimal Design of Ultra-high speed Axial Flux Permanent Magnet Motor with Sinusoidal Back-EMF” KIEE Spring Conference, 25-April-2014.

  5. Sunil Kumar, Wenliang Zhao, Thomas A. Lipo, and Byung-il Kwon, “Optimal Rotor Design of Ultra-high speed Axial Flux Permanent Magnet Motor for Cogging Torque and Torque Ripple Minimization” KIEE Summer Conference, 16-July-2014.

  6. Sunil Kumar, Thomas A. Lipo, and Byung-il Kwon, “Analytical Design of Rotor Magnet Shape of an Ultra-High Speed Three-Phase Axial Flux Permanent Magnet Machine” KIEE Spring Conference, 17-April-2015.

  7. Sunil Kumar, and Byung-il Kwon, “Rotordynamic Analysis of High-speed Axial-flux type Permanent Magnet Machine” KIEE Fall Conference, 21-Oct- 2016.

  8. Sunil Kumar, and Byung-il Kwon, “Experimental Evaluation and Analysis of High-Speed Axial Flux PM Machine for Flywheel Energy Storage”, KIEE Summer conference, 14-July-2017.

  9. Sunil Kumar, Hyeun-Myeong Yang, Byung-il Kwon, ‘Axial Force Control of a High-Speed Axial Flux PM Machine for Flywheel Energy Storage System’’. KIEE Summer conference, 12-July-2018.

Contact Information:

Contact: sunil.kumar@dsu.edu.pk
Extension: 159

Engr. Dr. Muhammad Usama Siddiqui

Assistant Professor

• PhD (Mechanical Engineering) KFUPM, Saudi Arabia
• MS (Mechanical Engineering) KFUPM, Saudi Arabia
• BE (Mechanical Engineering) NUST, Pakistan

Profile:

• Assistant Professor, Mechanical Engineering Department, DHA Suffa University
• Cluster Head – Mechanics cluster

Research Interests:
• Computational mechanics
• Homogenization methodologies
• Heterogeneous materials design
• Solar photovoltaic systems
• Evolutionary optimization

Research Projects (Ongoing and Completed) :

• Structural design of high-speed target drone Development of a photovoltaic powered reverseosmosis system
• Computational modeling and analysis of thermal barrier coatings
• Development of improved ceramic substrate material for power electronics applications
• Development of improved computational model for estimation of thermal conductivity of nanocomposites

Publications:
• Siddiqui, Muhammad Usama and Abul Fazal M. Arif. 2016. Generalized Effective Medium Theory for Particulate Nanocomposite Materials. Materials 9(8):694. (Impact Factor: 2.94)
• Siddiqui, M. U. and Abul Fazal M. Arif. 2016. A Computational Approach for the Constitutive Modeling of Elastoplastic Behavior of Metal Matrix Composites. International Journal of Computational Methods 14(2): 1750058. (Impact Factor: 1.12)
• Siddiqui, Muhammad Usama, Abul Arif, and Salem Bashmal. 2016. Permeability-Selectivity Analysis of Microfiltration and Ultrafiltration Membranes: Effect of Pore Size and Shape Distribution and Membrane Stretching. Membranes 6(3):40. (Impact Factor: 2.12)
• M. U. Siddiqui, A. F. M. Arif, N. Saheb and M. S. Khan. 2017. Constitutive modeling of elastoplasticity in spark-plasma sintered metal-matrix nanocomposites. Materials Science and Engineering: A 689:176-188 (Impact Factor: 2.65)
• S. S. Akhtar, M. U. Siddiqui, Kabeer Raza, A. S. Hakeem, L. T. Kareem, A. F. M. Arif. 2017. Computational and experimental study on the effective properties of Alumina/Nickel Composite. Accepted in Journal of Applied Ceramic Technology (Impact Factor: 1.53)
• Nouari Saheb, Najam Ul Qadir, Muhammad Usama Siddiqui, Abul Fazal Muhammad Arif, Syed Sohail Akhtar and Nasser Al-Aqeeli. 2014. Characterization of Nanoreinforcement Dispersion in Inorganic Nanocomposites: A Review. Materials 7:4148-81. (Impact Factor: 2.94)
• S. S. Akhtar, L. T. Kareem, A. F. M. Arif, M. U. Siddiqui, A.S. Hakeem. Development of a Ceramic-based Composite for Direct Bonded Copper Substrate. Ceramics International 43(6):5236-5246 (Impact Factor: 2.76)
• Siddiqui, M. Usama, A. F. M. Arif, Leah Kelley, and Steven Dubowsky. 2012. Three-Dimensional Thermal Modeling of a Photovoltaic Module under Varying Conditions. Solar Energy 86(9):2620-31. (Impact Factor: 3.68)
• Siddiqui, M. U. and A. F. M. Arif. 2013. Electrical, Thermal and Structural Performance of a Cooled PV Module: Transient Analysis Using a Multiphysics Model. Applied Energy 112:300-312. (Impact Factor: 5.75)
• Siddiqui, M. U., A. F. M. Arif, A. M. Bilton, S. Dubowsky, and M. Elshafei. 2013. An Improved Electric Circuit Model for Photovoltaic Modules Based on Sensitivity Analysis. Solar Energy 90:29-42. (Impact Factor: 3.68)
• Siddiqui, M. U. and M. Abido. 2013. Parameter Estimation for Five- and Seven-Parameter Photovoltaic Electrical Models Using Evolutionary Algorithms. Applied Soft Computing 13(12):4608-21. (Impact Factor: 2.86)
• Hasan, Osama, A. F. M. Arif, and M. U. Siddiqui. 2013. Finite Element Modeling, Analysis, and Life Prediction of Photovoltaic Modules. Journal of Solar Energy Engineering 136(2):21022. (Impact Factor: 1.44)
• Siddiqui, M. U. and A. F. M. Arif. 2012. Effect of Changing Atmospheric and Operating Conditions on the Thermal Stresses in PV Modules. in ASME ESDA 2012 Vol. 2. Nantes France.
• Hasan, Osama, A. F. M. Arif, and M. U. Siddiqui. 2012. Finite Element Modeling and Analysis of Photovoltaic Modules. in Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition. Housten, Texas.
• Siddiqui, M. U. and A. F. M. Arif. 2014. Computational Homogenization of Metal Matrix Composites. in Proceedings of the 25th CANCAM. London, Ontario, Canada.
• Siddiqui, M. U. and A. F. M. Arif. 2016. Estimation of Thermal Conductivity of Nanocomposites with Non-Uniformly Distributed Inclusions. in 24th International Congress of Theoretical and Applied Mechanics (ICTAM 2016). Montréal, Québec, Canada.
• Akhtar, S. S., A. Bin Ali, M. U. Siddiqui, A. F. M. Arif, and Amir Al-Ahmad. 2016. Development of Graphene-Filled Polymer Nanocomposites for Enhanced Thermal Conductivity. in 3rd International Conference on Structural Nano Composites (NANOSTRUC 2016). Aberdeen, Scotland.
• Akhtar, S. S., A. F. M. Arif, M. U. Siddiqui, H. K. R. Chishti, and L. T. Kareem. 2016. Computational Design and Development of Alumina-Nickel Droplet Composites. in Proceedings of the ASME 2016 International Mechanical Engineering Congress & Exposition. Phoenix, AZ, USA.
• Muhammad Usama Siddiqui, Abul Fazal Muhammad Arif and Syed M. Zubair. Heat Exchanger for Photovoltaic Panels. Patent number 20150280040.

PublicationsImpact FactorPatentsCitationsi10-Index
2243.8145611

Contact Information:
Email: musiddiqui@dsu.edu.pk

Dr. Muhammad Sajjad Ashraf

Assistant Professor & PG Program Manager (MS)

Ph.D (Management Sciences) – Greenwich University
MBA (Finance) – Bahria University

Muhammad Sajjad Ashraf achieved his Ph.D from Greenwich University in November 2023. With a versatile profile spanning teaching, training, and industry expertise, he brings a unique blend of skills and experience. He has spent nearly a decade in the BPO industry, holding various roles and providing services to authorized retailers of prominent US telecom service providers, including AT&T, Cricket Wireless, and T-Mobile

Industry Experience:
Senior Data Analyst (Sales Support Department) at ABIC Systems
Assistant Manager (Reporting Department) at Level3 BOS Pvt. Ltd.
Financial Analyst (Financial Planning & Analysis Department) at Level3 BOS Pvt. Ltd.

Research Interest:
– Sustainable Economic Growth
– Sustainable Development Goals (SDGs)
– People Category of SDGs

PUBLICATIONS:
How the price dynamics of energy resources and precious metals interact with conventional and Islamic Stocks: Fresh insight from dynamic ARDL approach
Godil, Danish Iqbal, Salman Sarwat, Muhammad Kamran Khan, Muhammad Sajjad Ashraf, Arshian Sharif, and Ilhan Ozturk. “How the price dynamics of energy resources and precious metals interact with conventional and Islamic Stocks: Fresh insight from dynamic ARDL approach.” Resources Policy 75 (2022): 102470.
https://doi.org/10.1016/j.resourpol.2021.102470

People Category of UN SDGs 2030 and Sustainable Economic Growth in Asia and the Pacific Region
Ashraf, M. S., Ahmed, F., Kousar, S., Ferreira, P. J. S., & de Almeida, D. M. F. (2024). People Category of UN SDGs 2030 and Sustainable Economic Growth in Asia and the Pacific Region. Sustainability, 16(18), 7950.
https://doi.org/10.3390/su16187950

Sustainable Economic Growth and Sustainable Development Goals (SDGs): Empirical Evidence from Low & Lower Middle-Income Countries
Ashraf, M. S., Ahmed, F., & Rehman, S. (2023). Sustainable Economic Growth and Sustainable Development Goals (SDGs): Empirical Evidence from Low & Lower Middle-Income Countries. Journal of Social Sciences Review, 3(1), 824-832.
https://doi.org/10.54183/jssr.v3i1.182

 

Contact Information:
Email: muhammad.sajjad@dsu.edu.pk
Extension: 328